How to Care For & Clean Your Jewelry May 01 2017
Some of the questions we're asked most frequently, both via email and during in-person consultations, are how to take care of your new jewelry, be it wedding bands or an engagement ring. There are two ways you can go about doing this. You can try to keep the ring as pristine as possible, taking care not to scratch it, and having it regularly re-finished—or you can wear your ring and consider the scratches and dings as evidence of your years of marriage.
Because finishes are just a surface treatment, they will change with continued wear. A matte finish becomes shinier as the metal is burnished, and a shiny finish becomes more matte as larger scratches begin to show up. This happens faster with precious metals than it does with industrial metals, but all finishes on rings will change over time.
The matte finish on your ring can be touched up from time to time with the scrubby side of a (clean) sponge, or with a new, unused Scotch-Brite pad. Similarly, as a shiny finish becomes more matte with wear, it can be re-polished. However, this removes material from the surface of the ring and can make your ring thinner over time (becoming less durable), so we don't suggest doing so too often.
Many commercial white gold rings have been rhodium plated, or "dipped." Similar to the finish on your ring, plating is just a thin coating of another metal on the surface of the base metal, and it does wear away with time. If your ring has a rhodium plating, it will need to be re-plated once a year in order to maintain the look. Because rhodium plating is a very toxic process and bad for the environment, we do not plate any of our wedding bands. We also believe that white gold is a really lovely color that doesn't need to be covered up.
For additional information on ring finishes, check out this blog post.
Cleaning Your Ring
To clean your wedding band, simply soaking your ring in a solution of warm water and mild soap (a shallow bowl or glass works best), rinsing it and drying off with a soft cotton cloth is often enough to remove and oil and dirt that may have built up on the surface. If your band has a deeper texture with hard to reach areas, it may also benefit from a gentle cleaning with a new toothbrush.
Because toothpaste (and its residue) is fairly abrasive and can scratch both the surface of your ring and any stones, the toothbrush you use should be new and used solely for the purpose of cleaning your jewelry.
As you wear your engagement ring, you might notice the stone(s) becoming less sparkly—what gives? Through your daily activities, things like lotion, oil, and dirt become trapped on the underside of the stone and inside the stone setting, which can dull the appearance of the stone as they build up. The longer the build up remains on there the harder it is to remove, so regular cleaning is important.
From left to right: 6mm Stone Texture Hand-carved Classic Band in matte 950 Palladium with a flush set Australian sapphire, 5mm Classic Engagement Ring in shiny 14k White Gold with an Australian champagne diamond, 5mm Crown Solitaire in matte 950 Palladium with a Montana sapphire
The easiest way to remove the build up at home is by using a brand-new, clean toothbrush with mild dish soap (Dawn is great for this). Very gently clean the underside of the setting, rinse with water and use a soft cotton cloth to dry the ring. If the stone setting has prongs, be careful that none of the bristles become stuck. Always close the drain in your sink when rinsing your ring, as metal can become slippery when wet.
While doing so can often feel tedious, keeping your rings clean also ensures that you're aware if something is wrong.
While it's common to want to wear your new ring 24/7 after receiving it, we recommend taking it off while you sleep, as it allows your skin to breathe. Not doing so traps moisture underneath the ring (similar to wearing a band-aid) which can eventually lead to skin irritation. This is different than an allergic reaction to the metal, but can look similar.
Another reason to take your ring off every night is so that it doesn't become stuck on your finger. Because your fingers tend to swell quite a bit while you sleep, wearing a ring while you sleep can cut off circulation. Additionally, if you take your ring off every night, you will notice if your finger size is increasing. That way you can get your ring re-sized before it gets too tight.
When you do remove your ring, take care to store it somewhere that it won't bump into or be jostled by other jewelry items, as they can scratch and dent one another.
Ring storage idea: try one of our walnut ring boxes--they’re handmade from sustainable wood!
While there’s no need to remove your ring when you wash your hands, we do strongly suggest removing your ring before working with bleach-based cleaners and chemicals, or before swimming in chlorinated water (swimming pools, hot tubs, etc) or in the ocean. Both chlorine and salt water can damage gold jewelry and cause it to become brittle, which can lead to discoloration, cracking, and lost stones. Hot tubs are even worse, as the increased chlorine concentrations and the heat speed up the chemical reactions that damage your jewelry.
Additionally, never wear your ring during high-impact activities like rock-climbing, weight lifting, and moving furniture, as they pose a risk for damaging (denting, scratching, etc) your ring. In some cases, you also run the risk of seriously injuring your finger if your ring gets caught on something. The easiest way to prevent this is to use your best judgement, take your ring off, and keep it somewhere safe so that you don’t lose it while you're doing these things--the pouch or ring box you receive your ring in are both great options.
Last year, a customer reached out to us to let us know that his ring had gotten caught on a piece of equipment while at work and had been damaged. While he was fortunate that his hand hadn't been injured and that the damage to the ring was reparable, the outcome could have very easily been different. The takeaway: remove your ring before high impact activities.
With silver, palladium, platinum, and gold bands, it is important to remember that it is fine jewelry. If you do not want your ring to bend, scratch, or gouge, it should be treated with care for it to last. Anything (metal, stone, etc.) harder than your ring can leave its mark.
Oftentimes, what people think are scratches on the surface of their new ring are actually scuff marks, similar to how a pair of shoes will show scuff marks when worn. Unlike scratches, scuff marks can be seen but not felt and they can be made by hard leather, wood, and plastic (such as purses, briefcases, dishes, steering wheels, etc), and are part of the burnishing process. This will be less evident with more textured bands, as the marks can "blend in" to the texture and make them less obvious.
That said, visible wear on your wedding band is inevitable. Some metals, regardless of how diligent your care for them, are softer and will begin to show wear more quickly than other, more durable metal alloys. Wide, flat, smooth surfaces will show wear more quickly than textured and curved surfaces.
Looking for more information on metal durability? Check out this blog post!
Still have questions? Send us a message!
Customize Your Ring with Colored Gemstones July 29 2016
You know you want a unique ring and you're pretty sure that you're interested in a colored gemstone--but where do you go from there? What are your ethical options?
We have a wide range of ethical gemstones to select from, with two newly available options!
Chatham Padaradscha Sapphires
Pink stones have been increasing in popularity in recent years, but many available options aren't hard enough to hold up to daily or near daily wear in a ring setting. We have a wide range of Padparadscha sapphires available to us, ranging from light pinks and peachs to more vivid pinks and fiery orange reds, in a wide range of cuts and sizes to fit our Engagement Ring settings.
Can you tell the difference?
We get a lot questions asking about creating custom engagement rings with morganite, which has a tendency to chip over the course of its lifetime, making less than ideal for setting in a ring. That's why we had Chatham color match a Padparadscha sapphire for us! The stone on the right is Chatham Morganite and the left is our color-matched Chatham Padparadscha Sapphire! It has the same color and look as the Morganite option, but with a resistance to chip and scratching, so there's no need to worry about damaging your ring!
Don't see the color you're looking for? Our Chatham Sapphires are also available in a wide range of colors, shades, and cuts--send us a message or check out more of our available options here! Looking for a natural, ethical sapphire? Take a look at our Montana and Australia round cut options!
These limited edition stones have a very unique look and color! Because of the way that moissanite is grown, its inclusions present as needle-like, which give the grey moissanite a cloudiness similar to black and raw diamonds, making them a great (and ethical) alternative.
As these are a limited edition product, our supply is also limited. Please contact us for availability or for an estimate.