News

How to Care For & Clean Your Jewelry

How to Care For & Clean Your Jewelry

Some of the questions we're asked most frequently, both via email and during in-person consultations, are how to take care of your new jewelry, be it wedding bands or an engagement ring. There are two ways you can go about doing this. You can try to keep the ring as pristine as possible, taking care not to scratch it, and having it regularly re-finished—or you can wear your ring and consider the scratches and dings as evidence of your years of marriage. 

Bead Set Hand-carved Classic Wedding Band in Yellow Gold and Tiny Rustic Bead Set Band

Top and bottom: Nine Stone Rustic Stacking Ring and 3mm Bead-set Hand-carved Classic Band, both in 10k yellow gold with diamonds

Ring Finishes

Because finishes are just a surface treatment, they will change with continued wear. A matte finish becomes shinier as the metal is burnished, and a shiny finish becomes more matte as larger scratches begin to show up. This happens faster with precious metals than it does with industrial metals, but all finishes on rings will change over time.

 

From left to right: 8mm Hand-carved Classic Band in matte 10k Yellow Gold, 3mm Slim Classic Simple Band in shiny 14k Rose Gold

The matte finish on your ring can be touched up from time to time with the scrubby side of a (clean) sponge, or with a new, unused Scotch-Brite pad. Similarly, as a shiny finish becomes more matte with wear, it can be re-polished. However, this removes material from the surface of the ring and can make your ring thinner over time (becoming less durable), so we don't suggest doing so too often.

 

Many commercial white gold rings have been rhodium plated, or "dipped." Similar to the finish on your ring, plating is just a thin coating of another metal on the surface of the base metal, and it does wear away with time. If your ring has a rhodium plating, it will need to be re-plated once a year in order to maintain the look. Because rhodium plating is a very toxic process and bad for the environment, we do not plate any of our wedding bands. We also believe that white gold is a really lovely color that doesn't need to be covered up. 

For additional information on ring finishes, check out this blog post.

Cleaning Your Ring

Wedding Bands

To clean your wedding band, simply soaking your ring in a solution of warm water and mild soap (a shallow bowl or glass works best), rinsing it and drying off with a soft cotton cloth is often enough to remove and oil and dirt that may have built up on the surface. If your band has a deeper texture with hard to reach areas, it may also benefit from a gentle cleaning with a new toothbrush.

From left to right: 4mm Hand-carved Classic Band in matte 950 Palladium, 2mm Hand-carved Classic Band in matte 950 Palladium

Because toothpaste (and its residue) is fairly abrasive and can scratch both the surface of your ring and any stones, the toothbrush you use should be new and used solely for the purpose of cleaning your jewelry.

Engagement Rings

As you wear your engagement ring, you might notice the stone(s) becoming less sparklywhat gives? Through your daily activities, things like lotion, oil, and dirt become trapped on the underside of the stone and inside the stone setting, which can dull the appearance of the stone as they build up. The longer the build up remains on there the harder it is to remove, so regular cleaning is important. 

  

From left to right: 6mm Stone Texture Hand-carved Classic Band in matte 950 Palladium with a flush set Australian sapphire, 5mm Classic Engagement Ring in shiny 14k White Gold with an Australian champagne diamond, 5mm Crown Solitaire in matte 950 Palladium with a Montana sapphire

The easiest way to remove the build up at home is by using a brand-new, clean toothbrush with mild dish soap (Dawn is great for this). Very gently clean the underside of the setting, rinse with water and use a soft cotton cloth to dry the ring. If the stone setting has prongs, be careful that none of the bristles become stuck. Always close the drain in your sink when rinsing your ring, as metal can become slippery when wet.

While doing so can often feel tedious, keeping your rings clean also ensures that you're aware if something is wrong.

Ring Care

While it's common to want to wear your new ring 24/7 after receiving it, we recommend taking it off while you sleep, as it allows your skin to breathe. Not doing so traps moisture underneath the ring (similar to wearing a band-aid) which can eventually lead to skin irritation. This is different than an allergic reaction to the metal, but can look similar.

Another reason to take your ring off every night is so that it doesn't become stuck on your finger. Because your fingers tend to swell quite a bit while you sleep, wearing a ring while you sleep can cut off circulation. Additionally, if you take your ring off every night, you will notice if your finger size is increasing. That way you can get your ring re-sized before it gets too tight.

When you do remove your ring, take care to store it somewhere that it won't bump into or be jostled by other jewelry items, as they can scratch and dent one another. 

 

Ring storage idea: try one of our walnut ring boxes--they’re handmade from sustainable wood!

While there’s no need to remove your ring when you wash your hands, we do strongly suggest removing your ring before working with bleach-based cleaners and chemicals, or before swimming in chlorinated water (swimming pools, hot tubs, etc) or in the ocean. Both chlorine and salt water can damage gold jewelry and cause it to become brittle, which can lead to discoloration, cracking, and lost stones. Hot tubs are even worse, as the increased chlorine concentrations and the heat speed up the chemical reactions that damage your jewelry.

Additionally, never wear your ring during high-impact activities like rock-climbing, weight lifting, and moving furniture, as they pose a risk for damaging (denting, scratching, etc) your ring. In some cases, you also run the risk of seriously injuring your finger if your ring gets caught on something. The easiest way to prevent this is to use your best judgement, take your ring off, and keep it somewhere safe so that you don’t lose it while you're doing these things--the pouch or ring box you receive your ring in are both great options.

  

Last year, a customer reached out to us to let us know that his ring had gotten caught on a piece of equipment while at work and had been damaged. While he was fortunate that his hand hadn't been injured and that the damage to the ring was reparable, the outcome could have very easily been different. The takeaway: remove your ring before high impact activities.

With silver, palladium, platinum, and gold bands, it is important to remember that it is fine jewelry. If you do not want your ring to bend, scratch, or gouge, it should be treated with care for it to last. Anything (metal, stone, metal twist caps on bottles, etc.) harder than your ring can leave a mark.

However, oftentimes what people think are scratches on the surface of their new ring are actually scuff marks, similar to how a pair of shoes will show scuff marks when worn. Unlike scratches, scuff marks can be seen but not felt and they can be made by hard leather, wood, and plastic (such as purses, briefcases, dishes, steering wheels, etc), and are part of the burnishing process. This will be less evident with more textured bands, as the marks can "blend in" to the texture and make them less obvious.

 

From left to right: 7x1.5mm Flat Band in matte 10k Yellow Gold, 7mm Wood Texture Flat Band in matte 10k Yellow Gold

That said, visible wear on your wedding band is inevitable. Some metals, regardless of how diligent your care for them, are softer and will begin to show wear more quickly than other, more durable metal alloysWide, flat, smooth surfaces will show wear more quickly than textured surfaces and narrow bands.

Looking for more information on metal durability? Check out this blog post!

Still have questions? Send us a message!